Product information "Anti-theft system 30 mm (for O60B & O120B)"
With these subtle stainless steel elements, your OPUS SOLO and OPUS PRIMO concrete furniture is unobtrusively protected from theft in the outdoor area. Only 4 small holders can be seen from above, but their true strength is revealed underneath.
To do this, place the bench on its side at your desired location and fit the two clamps together with the supplied screws underneath the furniture. This creates the holder, as shown in the photo. Next, holes are prepared in the subsoil, which are then filled with concrete. Then set up the bench in a way so that the anchoring claws press into the fresh concrete and thus form a solid anchoring with the ground. This type of protection should make it difficult to remove your furniture since there are no visible ways to loosen this anchoring.
Included: 4 individual claws = 2 set attachment as shown, 4 screws M8, VA; 4 nuts M8, VA
**Our products are made of natural materials and are made by hand. The natural composition is always "individual pieces". In this type of production, color differences and small pore openings - also in comparison to the illustrations in the shop or catalog - are part of the usual nature of the material. In the case of concrete products, shading can also occur. These may include, among others, by influences such as temperature differences, humidity and concrete post-treatments or by impregnation. Such material properties belong to the typical or agreed upon nature of the products and do not constitute defects.**
