Anti-theft system 50 mm (for O160B)

With these subtle stainless steel elements, your OPUS LONGUS concrete furniture is unobtrusively protected from theft in the outdoor area. Only 4 small holders can be seen from above, but their true strength is revealed underneath.

To do this, place the bench on its side at your desired location and fit the two clamps together with the supplied screws underneath the furniture. This creates the holder, as shown in the photo. Next, holes are prepared in the subsoil, which are then filled with concrete. Then set up the bench in a way so that the anchoring claws press into the fresh concrete and thus form a solid anchoring with the ground.
This type of protection should make it difficult to remove your furniture since there are no visible ways to loosen this anchoring.

Included: 4 individual claws = 2 set attachment as shown, 4 screws M8, VA; 4 nuts M8, VA